Peritoneal Dialysis: Dose & Adequacy
When kidneys fail, waste products such as urea and creatinine build up in the blood. One way to remove these wastes is a process called peritoneal dialysis (PD). The walls of the abdominal cavity are lined with a membrane called the peritoneum. During PD, a mixture of dextrose (sugar), salt, and other minerals dissolved in water, called dialysis solution, is placed in a person's abdominal cavity through a catheter. The body's peritoneal membrane enclosing the digestive organs allows waste products and extra body fluid to pass from the blood into the dialysis solution. These wastes then leave the body when the used solution is drained from the abdomen. Each cycle of draining and refilling is called an exchange. The time the solution remains in the abdomen between exchanges is called the dwell time. During this dwell time, some of the dextrose in the solution crosses the membrane and is absorbed by the body.
Many factors affect how much waste and extra fluid are removed from the blood. Some factors—such as the patient's size and the permeability, or speed of diffusion, of the peritoneum—cannot be controlled. Dialysis solution comes in 1.5-, 2-, 2.5-, or 3-liter bags for manual exchanges and 5- or 6-liter bags for automated exchanges. The dialysis dose can be increased by using a larger fill volume, but only within the limits of the person's abdominal capacity. Everyone's peritoneum filters wastes at a different rate. In some people, the peritoneum does not allow wastes to enter the dialysis solution efficiently enough to make PD feasible.
Other factors that determine how efficiently a person's blood is filtered can be controlled. Controllable factors include the number of daily exchanges and the dwell times. When fresh solution is first placed in the abdomen, it draws in wastes rapidly. As wastes fill the solution, it cleans the blood less efficiently. For example, a patient may perform one exchange with a 6-hour dwell time, during which the solution pulls in nearly as much urea as it can hold. But in the second half of that dwell time, urea is being removed from the blood very slowly. If the patient performed two exchanges with 3-hour dwell times instead, the amount of urea removed would be substantially greater than that removed in one 6-hour dwell time.
Another way to increase the amount of fluid and waste drawn into the peritoneal cavity is to use dialysis solution with a higher concentration of dextrose. Dialysis solution comes in 1.5 percent, 2.5 percent, and 4.25 percent dextrose concentrations. A higher dextrose concentration moves fluid and more wastes into the abdominal cavity, increasing both early and long-dwell exchange efficiency. Eventually, however, the body absorbs dextrose from the solution. As the concentration of dextrose in the body comes closer to that in the solution, dialysis becomes less effective, and fluid is slowly absorbed from the abdominal cavity.
Types of Peritoneal Dialysis
The two types of peritoneal dialysis differ mainly in the schedule of exchanges. In continuous ambulatory peritoneal dialysis (CAPD), the patient empties a fresh bag of dialysis solution into the abdomen. After 4 to 6 hours of dwell time, the patient returns the solution containing wastes to the bag. The patient then repeats the cycle with a fresh bag of solution. CAPD does not require a machine; the process uses gravity to fill and empty the abdomen. A typical prescription for CAPD requires three or four exchanges during the day and one long—usually 8 to 10 hours—overnight dwell time as the patient sleeps. The dialysis solution used for the overnight dwell time may have a higher concentration of dextrose so that it removes wastes and fluid for a longer time.
To remove even more wastes, a mini-cycler machine can be used to exchange the dialysis solution once or several times overnight as the patient sleeps. Such additional exchanges may also help prevent the body from absorbing excessive amounts of dextrose and dialysis solution from the overnight dwell time.
Continuous cycler-assisted peritoneal dialysis (CCPD) uses a machine to fill and empty the abdomen three to five times during the night while the person sleeps. In the morning, the last fill remains in the abdomen with a dwell time that lasts the entire day. Sometimes one additional exchange is done in the mid-afternoon to increase the amount of waste removed and to prevent excessive absorption of fluid. The dialysis solution used for the long daytime dwell may have a higher concentration of dextrose.
Testing for Efficiency
The tests to see whether the exchanges are removing enough urea are especially important during the first weeks of dialysis, when the health care team needs to determine whether the patient is receiving an adequate amount, or dose, of dialysis.
The peritoneal equilibration test—often called the PET—measures how much dextrose has been absorbed from a bag of infused dialysis solution and how much urea and creatinine have entered into the solution during a 4-hour dwell. The peritoneal transport rate varies from person to person. People who have a high rate of transport absorb dextrose from the dialysis solution quickly, and they should be given a dialysis schedule that avoids exchanges with a long dwell time because they tend to absorb too much dextrose and dialysis solution from such exchanges.
In the clearance test, samples of used solution drained over a 24-hour period are collected, and a blood sample is obtained during the day when the solution is collected. The amount of urea in the solution is compared with the amount in the blood to see how effective the current PD schedule is in clearing the blood of urea. If the patient has more than a few ounces of urine output per day, the urine should also be collected during this period to measure its urea concentration.
From the used solution, urine, and blood measurements, one can compute a urea clearance, called Kt/V, and a creatinine clearance rate—normalized to body surface area. The residual clearance of the kidneys is also considered. Based on these measurements, one can determine whether the PD dose is adequate.
If the laboratory results show that the dialysis schedule is not removing enough urea and creatinine, the doctor may change the prescription by
- increasing the number of exchanges per day for patients treated with CAPD or per night for patients treated with CCPD
- increasing the volume—amount of solution in the bag—of each exchange in CAPD
- adding an extra, automated middle-of-the-night exchange to the CAPD schedule
- adding an extra middle-of-the-day exchange to the CCPD schedule
- using a dialysis solution with a higher dextrose concentration
One of the big problems with PD is that patients sometimes do not perform all of the exchanges recommended by their medical team. They either skip exchanges or sometimes skip entire treatment days when using CCPD. Skipping PD treatments has been shown to increase the risk of hospitalization and death.
Residual Kidney Function
Normally the PD prescription factors in the amount of residual kidney function. Residual function typically falls, although slowly, over the months or even years of treatment with PD. This means that, more often than not, the number of PD exchanges prescribed, or the volume of exchanges, needs to be increased as residual function falls.
The doctor should determine the patient's dose of PD on the basis of practice guidelines published by the National Kidney Foundation's Kidney Disease Outcomes Quality Initiative (K/DOQI) (see For More Information). Health care providers should work closely with their patients to ensure that the proper PD dose is administered. To maximize health and prolong life, patients should follow instructions carefully to get the most out of their dialysis exchanges.
The National Institute of Diabetes and Digestive and Kidney Diseases (NIDDK) and other components of the National Institutes of Health (NIH) conduct and support research into many diseases and conditions.
What are clinical trials, and are they right for you?
Clinical trials are part of clinical research and at the heart of all medical advances. Clinical trials look at new ways to prevent, detect, or treat disease. Researchers also use clinical trials to look at other aspects of care, such as improving the quality of life for people with chronic illnesses. Find out if clinical trials are right for you.
What clinical trials are open?
Clinical trials that are currently open and are recruiting can be viewed at www.ClinicalTrials.gov.
About the Kidney Failure Series
You and your doctor will work together to choose a treatment that's best for you. The publications of the NIDDK Kidney Failure Series can help you learn about the specific issues you will face.
- What I need to know about Kidney Failure and How it’s Treated
- Treatment Methods for Kidney Failure: Hemodialysis
- Treatment Methods for Kidney Failure: Peritoneal Dialysis
- Treatment Methods for Kidney Failure: Kidney Transplantation
- Kidney Failure: Eat Right to Feel Right on Hemodialysis
- Kidney Failure: What to Expect
- Vascular Access for Hemodialysis
- Hemodialysis Dose and Adequacy
- Peritoneal Dialysis Dose and Adequacy
- Amyloidosis and Kidney Disease
- Anemia in Chronic Kidney Disease
- Chronic Kidney Disease-Mineral and Bone Disorder
- Financial Help for Treatment of Kidney Failure
Learning as much as you can about your treatment will help make you an important member of your health care team.
- PDF Version (269 KB)
This content is provided as a service of the National Institute of Diabetes and Digestive and Kidney Diseases (NIDDK), part of the National Institutes of Health. The NIDDK translates and disseminates research findings through its clearinghouses and education programs to increase knowledge and understanding about health and disease among patients, health professionals, and the public. Content produced by the NIDDK is carefully reviewed by NIDDK scientists and other experts.
The NIDDK would like to thank:
Dr. John Daugirdas, University of Illinois College of Medicine; Dr. Karl Nolph, University of Missouri Department of Internal Medicineo